Enabling autonomy on
existing FPV interceptors.
Drop-in hardware modules that turn any FPV into an autonomous interceptor. Built for low-cost, high-volume deployment.
Pilots can't see their targets.
Beyond-visual-range sensing.
Autonomous or operator-assisted.
The module sits between the receiver and flight controller. It can guide the interceptor autonomously to a target, or surface bearing data to operators flying manually — closing the gap between cueing and visual acquisition.
Hands-off Intercept
The module asserts control of the flight link and guides the interceptor to the target. Vision takes over for the terminal phase.
Bearing Assist
For pilots flying manually, the module surfaces target bearing beyond visual range — directly in their goggles.
Sits between RX and FC.
The module intercepts the control link between receiver and flight controller. In manual mode, control passes through unmodified. In autonomous mode, the module takes over guidance using onboard sensing.
Three-phase intercept.
Cue
Target bearing, range, and altitude from C4ISR network.
Midcourse
Onboard sensing guides the interceptor toward the target beyond visual range.
Terminal
Vision-based guidance for final intercept.
Built by engineers
who ship hardware.
Our team brings experience from rocketry, defense systems, satellite hardware, and embedded systems.
contact@vernius.systems